Both Mount Plates Hidden
Both tow-hook mount plates are hidden behind the bumper.
- Bumper flush with hood XG-06INT4
- Bumper protrudes 2 inches beyond hood XG-06INT4E
INTERNATIONAL MEDIUM-DUTY FITMENT GUIDE
Which Ex-Guard Kit Is Right for My International DuraStar / 4400 / 4300 / MV?
For model years 2004 through 2022, compare the tow-hook mount locations and bumper position to the three published configurations.
HOW TO IDENTIFY YOUR FITMENT
Start with Tow-Hook Location, Then Check the Bumper
There are three options for the mid-size International (Navistar) trucks known as DuraStar, 4300, 4400 or MV models for model years 2004 through 2022.
The correct Ex-Guard bracket kit is determined by the tow-hook location—specifically where each hook bolts to the truck—and whether the bumper is flush with the hood (most common) or extends at least 2 inches beyond the hood.
Download the current International comparison sheetFITMENT OPTIONS
Compare the Three Published Configurations
Match both sides of the truck before choosing a kit. Extended-bumper applications use the instructions shown with each option.
Passenger Exposed, Driver Hidden
The passenger-side tow hook is completely exposed in the breather area; the driver-side tow-hook mount plate is hidden behind the bumper.
- Bumper flush with hood XG-08IDSM
- Bumper protrudes 2 inches beyond hood XG-08IDSME
Both Tow Hooks Exposed
Both tow hooks are completely exposed in the breather area.
- Bumper flush with hood XG-08IDSL
- Extended kit in comparison heading XG-08IDSLE
- Extended kit named in published instruction XG-08IDSME
Published comparison note: The comparison heading pairs this configuration with XG-08IDSLE, while the published instruction says to use XG-08IDSME when the bumper protrudes 2 inches beyond the hood. Confirm the extended-bumper application before ordering.
FITMENT SUPPORT
Still Not Sure Which Kit Matches?
Send clear front-bumper photos and the truck year, model and bumper position to Ex-Guard, or browse the complete bracket-kit catalog.